Dear returning Carmageddon fans
These last years, the CWA Board assimilated what was archived from many old Carmageddon forums, including the whole of the Official Carmageddon.com Forums.
If you wish to merge any previous account you might have had with your new or existing CWA account, don't hesitate to reach out to us !
These last years, the CWA Board assimilated what was archived from many old Carmageddon forums, including the whole of the Official Carmageddon.com Forums.
If you wish to merge any previous account you might have had with your new or existing CWA account, don't hesitate to reach out to us !
Tosh's C1 car releases
- Toshiba-3
- BRender Actor
- Posts: 5515
- Joined: Sun Jun 08, 2003 12:14 am
- Location: MagnaChem Data Unit
- Contact:
Re: Tosh's car releases
model and textures by Harmalarm and I did the setup etc.
Had some fun tweaking the colours to the C1 palette and setting up a blend table on the windows.
I added crush datas but they generate that error message upon quitting a race with Carma95. So you can either ignore the error or swap to the crushless text file (included in the zip).
It's at RR2000.
- Mastro 666
- motorised death
- Posts: 968
- Joined: Thu Jan 26, 2006 6:24 pm
- Contact:
- Toshiba-3
- BRender Actor
- Posts: 5515
- Joined: Sun Jun 08, 2003 12:14 am
- Location: MagnaChem Data Unit
- Contact:
Re: Tosh's car releases
BUST-UP!
I hope you had a merry christmas and wish you the best for 2021
Here's a mashup with GrungeBuster X MonsterMasher X FraudBroko X RoadBratt, based on a concept by Mad_Maxine.
Grab it at Road Reaction:
https://rr2000.cwaboard.co.uk/carmageddon-1#cars
EDIT: updated a couple of times because I'm an idiot who doesn't test his releases and forgets to include half of the files.
I hope you had a merry christmas and wish you the best for 2021
Here's a mashup with GrungeBuster X MonsterMasher X FraudBroko X RoadBratt, based on a concept by Mad_Maxine.
Grab it at Road Reaction:
https://rr2000.cwaboard.co.uk/carmageddon-1#cars
EDIT: updated a couple of times because I'm an idiot who doesn't test his releases and forgets to include half of the files.
- Attachments
-
- DUMP0013.png (55.1 KiB) Viewed 6330 times
-
- DUMP0011.png (44.59 KiB) Viewed 6330 times
-
- DUMP0001.png (57.14 KiB) Viewed 6330 times
-
- DUMP0000.png (71.94 KiB) Viewed 6330 times
Re: Tosh's car releases
BUST-UP!
Very funny mashup, amazing!!
Very funny mashup, amazing!!
- Mastro 666
- motorised death
- Posts: 968
- Joined: Thu Jan 26, 2006 6:24 pm
- Contact:
- andreluizbarbieri
- pedestrian
- Posts: 5
- Joined: Sat Jan 30, 2021 12:52 pm
Re: Tosh's car releases
Thanks for all. I copied folders and already edited Opponent.Txt (put it end of list and increase the cars number). How can I select it in game (my profile) ?
4790k NVMe Rx580
- WadeSullivan
- hit n run
- Posts: 110
- Joined: Thu Feb 14, 2013 4:54 pm
- Contact:
Re: Tosh's car releases
If all the files are in the right place and the opponent.txt correct, just start the game, change car and go all the bottom of the list
- Toshiba-3
- BRender Actor
- Posts: 5515
- Joined: Sun Jun 08, 2003 12:14 am
- Location: MagnaChem Data Unit
- Contact:
Re: Tosh's car releases
Hello and welcome!
If you want to play with addon cars without having to unlock them, you need a completed savegame like this one http://tb.polygonized.com/dtd/c1/savegame.zip
Pay attention that if you already have a saved game, the one is the zip will overwrite the first slot.
If you want to play with addon cars without having to unlock them, you need a completed savegame like this one http://tb.polygonized.com/dtd/c1/savegame.zip
Pay attention that if you already have a saved game, the one is the zip will overwrite the first slot.
- andreluizbarbieri
- pedestrian
- Posts: 5
- Joined: Sat Jan 30, 2021 12:52 pm
Re: Tosh's car releases
Thanks very much, @Toshiba-3 (Master). Really with the game completed everything worksToshiba-3 wrote: ↑Sat Jan 30, 2021 6:14 pm Hello and welcome!
If you want to play with addon cars without having to unlock them, you need a completed savegame like this one http://tb.polygonized.com/dtd/c1/savegame.zip
Pay attention that if you already have a saved game, the one is the zip will overwrite the first slot.
4790k NVMe Rx580
- andreluizbarbieri
- pedestrian
- Posts: 5
- Joined: Sat Jan 30, 2021 12:52 pm
Re: Tosh's car releases
Please, I realized that nglide with carma 3dfx in dosbox has very good resolution and smoothing quality, but I was wondering if there is any carma95 version without dosbox that can call the API through nglide to improve resolution and smoothing.
4790k NVMe Rx580
- Toshiba-3
- BRender Actor
- Posts: 5515
- Joined: Sun Jun 08, 2003 12:14 am
- Location: MagnaChem Data Unit
- Contact:
Re: Tosh's car releases
nGlide only works for the 3dfx Glide API. Carma95's API isn't Glide but DirectDraw. So nGlide has no business with Carma95.
There are experimental "hires" Carma95 executables but they are largely unfinished and performance is subpar, you can find them in this list: https://rr2000.cwaboard.co.uk/pc-files#c1
Menus, cockpits and minimaps aren't scaled.
The only way to get "smoothed" visuals with Carma95 is to make use of filters with ddraw.dll. If you want to try, update to the latest cnc-ddraw release, and edit ddraw.ini the make use of one of the included shaders.
To be quite honest, if you're really after high resolution and smoothed textures, the best solution is indeed DOSBox with Glide Carma and nGlide. I personaly lower the gamma to 0.7 to avoid washed out visuals, and set Aspect correction to respect the original 4:3 resolution and avoid stretching.
Many C1 mods won't work properly in Glide mode though, and it has a few visual bugs.
There are experimental "hires" Carma95 executables but they are largely unfinished and performance is subpar, you can find them in this list: https://rr2000.cwaboard.co.uk/pc-files#c1
Menus, cockpits and minimaps aren't scaled.
The only way to get "smoothed" visuals with Carma95 is to make use of filters with ddraw.dll. If you want to try, update to the latest cnc-ddraw release, and edit ddraw.ini the make use of one of the included shaders.
To be quite honest, if you're really after high resolution and smoothed textures, the best solution is indeed DOSBox with Glide Carma and nGlide. I personaly lower the gamma to 0.7 to avoid washed out visuals, and set Aspect correction to respect the original 4:3 resolution and avoid stretching.
Many C1 mods won't work properly in Glide mode though, and it has a few visual bugs.
- andreluizbarbieri
- pedestrian
- Posts: 5
- Joined: Sat Jan 30, 2021 12:52 pm
Re: Tosh's car releases
Thanks, Tosh (Great Tosh). I like very much the mode nglide + 3dfx in DosBox, it is super antialising but no high FPS. The carma95 get high FPS with native executable but no good graphics (I like pixelated graphics but I would like test antialiasing).
"I will try what you said... " --> Perfect ! I used :
P.S nice effect in comment !
"I will try what you said... " --> Perfect ! I used :
shader=Shaders\xbrz\xbrz-freescale.glsl & maxfps=0
P.S nice effect in comment !
4790k NVMe Rx580
- Toshiba-3
- BRender Actor
- Posts: 5515
- Joined: Sun Jun 08, 2003 12:14 am
- Location: MagnaChem Data Unit
- Contact:
Re: Tosh's C1 car releases
Decided to start working on porting Jorma's C1 cars. So, the plane, the vintage Eagle, and the 50s Plow with the enormous Don (not pictured yet).
- Attachments
-
- unknown.png (51.55 KiB) Viewed 4822 times
-
- DUMP0008.png (129.32 KiB) Viewed 4822 times
- Mad_Maxine
- Pink
- Posts: 3232
- Joined: Tue Jan 10, 2006 1:24 pm
- Contact:
Re: Tosh's C1 car releases
I love the classic eagle type thing here :B remember seeing it before but it looks great ingame huh,
- Toshiba-3
- BRender Actor
- Posts: 5515
- Joined: Sun Jun 08, 2003 12:14 am
- Location: MagnaChem Data Unit
- Contact:
Re: Tosh's C1 car releases
- Attachments
-
- DUMP0005.png (102.63 KiB) Viewed 4784 times
Re: Tosh's C1 car releases
Listeria Nobby
With the spirit of the C1 Eagles, beautiful conversion!
With the spirit of the C1 Eagles, beautiful conversion!
- Toshiba-3
- BRender Actor
- Posts: 5515
- Joined: Sun Jun 08, 2003 12:14 am
- Location: MagnaChem Data Unit
- Contact:
Re: Tosh's C1 car releases
Thanks a lot for testing Lince!
50s Plough coming soon
50s Plough coming soon
- Mastro 666
- motorised death
- Posts: 968
- Joined: Thu Jan 26, 2006 6:24 pm
- Contact:
Re: Tosh's C1 car releases
I want the plane. Now!
- Toshiba-3
- BRender Actor
- Posts: 5515
- Joined: Sun Jun 08, 2003 12:14 am
- Location: MagnaChem Data Unit
- Contact:
Re: Tosh's C1 car releases
Great first experiment with stop-motion animation swapping visible material between actors. It all still deforms etc. Really cool stuff. Good job, Tosh Jorma
Just to explain a bit further: to keep the deformation working properly, it is important that each frame of the animation uses the exact same DAT model. But as the animation requires swapping textures (from transparent to visible) for each frame individually at different times, that means there must be a material per frame, but that would generate 6 models. And so instead, there is only one mapped but material-less model, which is instanced 6 times via actors and each actor defines the material. Just too bad we can't set multiple materials per actor (one for each material-less MatID).
Grab the good stuff at the roadest of 2000s reactions (reload the page if it doesn't appear)
- Toshiba-3
- BRender Actor
- Posts: 5515
- Joined: Sun Jun 08, 2003 12:14 am
- Location: MagnaChem Data Unit
- Contact:
Re: Tosh's C1 car releases
Updated the archive a couple of times, as there is a weird material issue in Glide mode where a couple of them would have their colour map multiplied with the indexed colour It seems like feeding a texture via a funk to a textureless material set onto an actor discards the default material settings enforcing. Or something like that. Anyway, had to use 3C type BRender materials, set the indexed colour to white, and force Map Interpolation. Interesting stuff.
Also fixed the cockpit crashing in DOS modes. It had to do with the mirror being rendered off screen, set it as a one-pixel view in the top left corner of the screen (so behind the pratcam) and it seems to do the trick. Weird because other addons (like the Listeria Nobby) don't have a problem with that offscreen one-pixel mirror.
There's still a strange issue with crushing not working in DOS modes (DOS software, Glide). Investigated this morning, but couldn't find the solution yet. As usual, Carma95 delivers
Finally, fixed the mirror camera position for Tanka+Trailer. Looking at the screenshots in the release post it seemed correct, but the released files didn't have the mirror camera properly set.
Also fixed the cockpit crashing in DOS modes. It had to do with the mirror being rendered off screen, set it as a one-pixel view in the top left corner of the screen (so behind the pratcam) and it seems to do the trick. Weird because other addons (like the Listeria Nobby) don't have a problem with that offscreen one-pixel mirror.
There's still a strange issue with crushing not working in DOS modes (DOS software, Glide). Investigated this morning, but couldn't find the solution yet. As usual, Carma95 delivers
Finally, fixed the mirror camera position for Tanka+Trailer. Looking at the screenshots in the release post it seemed correct, but the released files didn't have the mirror camera properly set.
- Mastro 666
- motorised death
- Posts: 968
- Joined: Thu Jan 26, 2006 6:24 pm
- Contact:
Re: Tosh's C1 car releases
50s Plow
Amazing and impresssssive work!!!!!
Amazing and impresssssive work!!!!!
- andreluizbarbieri
- pedestrian
- Posts: 5
- Joined: Sat Jan 30, 2021 12:52 pm
- Toshiba-3
- BRender Actor
- Posts: 5515
- Joined: Sun Jun 08, 2003 12:14 am
- Location: MagnaChem Data Unit
- Contact:
Re: Tosh's C1 car releases
PLANEMAGEDDON > PLANE EAGLE
Third and last model by Jorma Rysky
Spent a lot of time trying to get the rear of the plane to lift as it speeds up but no luck. Still a quite cool addon, the bounding box is tilted with the main actor which is nice. Used extra collision points for the tips of the wings, but we all know it's not perfect, these tips might go through stuff now and then.
Didn't test at all, might be crashy as usual, esp with sounds? Any feedback welcome
It's at RR2000 > https://rr2000.cwaboard.co.uk/carmageddon-1#cars
(reload the page if the plane doesn't appear in the list)
Third and last model by Jorma Rysky
Spent a lot of time trying to get the rear of the plane to lift as it speeds up but no luck. Still a quite cool addon, the bounding box is tilted with the main actor which is nice. Used extra collision points for the tips of the wings, but we all know it's not perfect, these tips might go through stuff now and then.
Didn't test at all, might be crashy as usual, esp with sounds? Any feedback welcome
It's at RR2000 > https://rr2000.cwaboard.co.uk/carmageddon-1#cars
(reload the page if the plane doesn't appear in the list)
- Attachments
-
- DUMP0000.png (47.95 KiB) Viewed 4307 times
-
- DUMP0005.png (115.92 KiB) Viewed 4307 times
- 70's Viking
- hit n run
- Posts: 241
- Joined: Fri Aug 19, 2016 7:04 pm
- Location: Norway
- Contact:
Re: Tosh's C1 car releases
Kamikaze into citizens
- JormaRysky
- pedestrian
- Posts: 20
- Joined: Wed Jun 11, 2014 4:48 pm
- Contact:
Re: Tosh's C1 car releases
I really apprecciate all the little details you put into these. Personified mugshots and all. Too bad it could not lift it's tail, but looks good in its current form too.
Re: Tosh's C1 car releases
PLANEMAGEDDON
Great work Jorma Risky & Toshiba-3.
Great work Jorma Risky & Toshiba-3.
Re: Tosh's C1 car releases
wow this is sick especially with eagle blade on top
- Toshiba-3
- BRender Actor
- Posts: 5515
- Joined: Sun Jun 08, 2003 12:14 am
- Location: MagnaChem Data Unit
- Contact:
Re: Tosh's C1 car releases
Thanks for testing, you persons. Especially nice to get those videos btw Lince
DARKSIDE from Twisted Metal 3
I didn't want to lose any more details in those textures when applying the C1 palette, so I adapted the textures to the C1 palette. They turn out more contrasted and brighter in software mode. However I exploited that glitch I encountered with the 50's Plough last time to make it darker in Glide mode: Applying the texture on their respective materials via funks rather than within the MAT file will multiply the texture with whatever indexed diffuse color is set to each material. Very interesting stuff. See screenshots below.
Also decided to create an atlas from the 20 textures. This made it easier to work on applying the C1 palette, but also ensured that all materials could be perspective correct. C1 software renderer can only correct perspective on materials holding a texture that's either 64x64 or 256x256, and most of the provided TM3 textures were smaller. So I put them all on a single 256x256
Funny thing is that I didn't touch the initial 20-material mapping at all. Instead, I tweaked each material transformation matrix to fit the respective texture within the atlas.
Get it at RR2000 alright
DARKSIDE from Twisted Metal 3
I didn't want to lose any more details in those textures when applying the C1 palette, so I adapted the textures to the C1 palette. They turn out more contrasted and brighter in software mode. However I exploited that glitch I encountered with the 50's Plough last time to make it darker in Glide mode: Applying the texture on their respective materials via funks rather than within the MAT file will multiply the texture with whatever indexed diffuse color is set to each material. Very interesting stuff. See screenshots below.
Also decided to create an atlas from the 20 textures. This made it easier to work on applying the C1 palette, but also ensured that all materials could be perspective correct. C1 software renderer can only correct perspective on materials holding a texture that's either 64x64 or 256x256, and most of the provided TM3 textures were smaller. So I put them all on a single 256x256
Funny thing is that I didn't touch the initial 20-material mapping at all. Instead, I tweaked each material transformation matrix to fit the respective texture within the atlas.
Get it at RR2000 alright
- Attachments
-
- DUMP0006.png (90.98 KiB) Viewed 4224 times
-
- darkside_glide.jpg (87.48 KiB) Viewed 4224 times
- TTR
- Psycho Maniac
- Posts: 5277
- Joined: Wed Oct 15, 2003 3:40 am
- Location: Rotterdam, Holland
- Contact:
Re: Tosh's C1 car releases
Oh wow I'm missing out on a lot here.
And thanks Tosh for still running the show here, and everyone else ofcourse
And thanks Tosh for still running the show here, and everyone else ofcourse
- 70's Viking
- hit n run
- Posts: 241
- Joined: Fri Aug 19, 2016 7:04 pm
- Location: Norway
- Contact:
Re: Tosh's C1 car releases
DARKSIDE from Twisted Metal 3
The legendary Darkside is back!!
A masterpiece to make mayhem!!
- Toshiba-3
- BRender Actor
- Posts: 5515
- Joined: Sun Jun 08, 2003 12:14 am
- Location: MagnaChem Data Unit
- Contact:
Re: Tosh's C1 car releases
As usual, thanks a lot for testing, guys
Lince: What's up with the blue shade? Playing with a modified palette?
And now...
DOOMCAR
originally designed by Anonymous and posted on /vr/
Recreated by Jorma Rysky for me to port into Carmageddon 1 yay
It comes with shading enabled and I included a LIT file in the zip in case some of you are playing Carma1 without any lights present in the registry (GOG's Splat Pack release for example).
'Cause yeah, turns out the game does load and use LIT files and they influence the ingame lighting..! Carmageddon 1's default light is SIMPLE.LIT but we never see its effect ingame as all materials are set to a shadetable that renders everything fullbright anyway.
To get this lighting setup, I've set all materials on the DOOMCAR to the following values:
Now I noticed I've set up shading on several other cars in the past but with custom lights loaded from the registry... I'll have to tweak them to work properly with SIMPLE.LIT only.
Anyway, grab the thing at RR2000
Lince: What's up with the blue shade? Playing with a modified palette?
And now...
DOOMCAR
originally designed by Anonymous and posted on /vr/
Recreated by Jorma Rysky for me to port into Carmageddon 1 yay
It comes with shading enabled and I included a LIT file in the zip in case some of you are playing Carma1 without any lights present in the registry (GOG's Splat Pack release for example).
'Cause yeah, turns out the game does load and use LIT files and they influence the ingame lighting..! Carmageddon 1's default light is SIMPLE.LIT but we never see its effect ingame as all materials are set to a shadetable that renders everything fullbright anyway.
To get this lighting setup, I've set all materials on the DOOMCAR to the following values:
Code: Select all
material = [
ambient = 0;
diffuse = 3;
specular = 0;
power = 0;
flags = [light, smooth, etc.];
index_shade = "DOOMCAR.TAB";
];
Anyway, grab the thing at RR2000
- Attachments
-
- DUMP0006.png (87.6 KiB) Viewed 4154 times
-
- DUMP0014.png (92.05 KiB) Viewed 4154 times
- 70's Viking
- hit n run
- Posts: 241
- Joined: Fri Aug 19, 2016 7:04 pm
- Location: Norway
- Contact:
Re: Tosh's C1 car releases
This car is...doomed?...i don't know
The car being so dark probaply just a problem over here in my game.
I guess
The car being so dark probaply just a problem over here in my game.
I guess
- Toshiba-3
- BRender Actor
- Posts: 5515
- Joined: Sun Jun 08, 2003 12:14 am
- Location: MagnaChem Data Unit
- Contact:
Re: Tosh's C1 car releases
Alright, updated the archive greatly. Thanks for testing quickly, Joker, I had noticed the problem earlier but didn't know how to tackle the issue for good.
The solution was to tweak the original SIMPLE.LIT file, I'll have to remember to include it in every addon using shadetables in the future. Basically I re-orientated the direct light angle slightly to highlight horizontal surfaces more directly, then I decreased the attenuation greatly (from 3.0 to 0.95). This makes the lighting way easier to work with. The doomcar MAT file can hold "normal" lighting values now, previously I had to push the directional lighting to 3.0 to achieve proper contrast (now that I write this, it might be linked to how the attenuation was set to 3.0? No idea).
Anyway that's cool.
What's even cooler though, is how the shading is enabled without using MATerials from the registry..! I once again used the texture-applied-via-funk trick to unlock the various material flags and properties! This is really great stuff and I hope this will also work with C2, would be awesome. EDIT: Just tested and while filtering can be disabled, nothing else can be tweaked sadly.
Basically, it seems like the game doesn't force the default material settings onto textureless materials. And it's then possible to apply a texture to these materials via FUNKs, defaut material settings are still not applied. This is how it's possible to force texture filtering on transparent textures in Glide mode, set an additional diffuse colour still in Glide mode, or here enabling lighting/shading.
The solution was to tweak the original SIMPLE.LIT file, I'll have to remember to include it in every addon using shadetables in the future. Basically I re-orientated the direct light angle slightly to highlight horizontal surfaces more directly, then I decreased the attenuation greatly (from 3.0 to 0.95). This makes the lighting way easier to work with. The doomcar MAT file can hold "normal" lighting values now, previously I had to push the directional lighting to 3.0 to achieve proper contrast (now that I write this, it might be linked to how the attenuation was set to 3.0? No idea).
Anyway that's cool.
What's even cooler though, is how the shading is enabled without using MATerials from the registry..! I once again used the texture-applied-via-funk trick to unlock the various material flags and properties! This is really great stuff and I hope this will also work with C2, would be awesome. EDIT: Just tested and while filtering can be disabled, nothing else can be tweaked sadly.
Basically, it seems like the game doesn't force the default material settings onto textureless materials. And it's then possible to apply a texture to these materials via FUNKs, defaut material settings are still not applied. This is how it's possible to force texture filtering on transparent textures in Glide mode, set an additional diffuse colour still in Glide mode, or here enabling lighting/shading.
- Attachments
-
- Struggling to tweak a LIT file (a light set) and material lighting properties in PlayThing 1
- plaything1-light-material.png (48.28 KiB) Viewed 4134 times
-
- DUMP0005.png (63.15 KiB) Viewed 4134 times
Check who’s online
Users browsing this forum: No registered users and 449 guests