Page 1 of 2
C2 To C1 Car Release
Posted: Mon Apr 09, 2018 5:19 pm
by WadeSullivan
Here we go, the C2 cars into C1, day by day i will refresh this list with new cars and post what is new
Any problem tell me.
And i wanna to thanks Toshiba for the patience and had taught me
------------------------------------------------------------
Carmageddon 2 Cars to C1
SlamSedan
------------------------------------------------------------
HickPickup
------------------------------------------------------------
DeGory'Un 2
------------------------------------------------------------
Rig O Mortis 2 (Semi MK2)
------------------------------------------------------------
Tornado (Screwie 2)
------------------------------------------------------------
ThunderBucket
------------------------------------------------------------
Mach13
------------------------------------------------------------
Prop Shafter
------------------------------------------------------------
JetCar
------------------------------------------------------------
ForkingAda
------------------------------------------------------------
LoggerHead
------------------------------------------------------------
RedVet
------------------------------------------------------------
HellRod
------------------------------------------------------------
Harvest
------------------------------------------------------------
Diablus
------------------------------------------------------------
Plow-MK2
------------------------------------------------------------
CopCrash
------------------------------------------------------------
Bimmer
------------------------------------------------------------
Piranha
------------------------------------------------------------
Mad Mortis
------------------------------------------------------------
Buzz Mobile
------------------------------------------------------------
DC Codbra
------------------------------------------------------------
Carmageddon 2 and TDR Modded Cars to C1
Monster Citroen
------------------------------------------------------------
Cleaver V3
------------------------------------------------------------
TDR CopCar - Swatty
------------------------------------------------------------
DarkSide
------------------------------------------------------------
Re: C2 To C1 Car Realese
Posted: Mon Apr 09, 2018 10:45 pm
by QTZ
This happened when names used for *different* parts / textures are *the same* in few files loaded at once (same textures / parts should have same names to use less memory).
Re: C2 To C1 Car Realese
Posted: Wed Apr 11, 2018 7:41 pm
by Razor
Lookin' good, chap. Any chance of Hick Pickup with it's beta skin? Also, are these feature complete?
Re: C2 To C1 Car Realese
Posted: Wed Apr 11, 2018 10:31 pm
by WadeSullivan
Skin i can work in the future
Yeah both are finished i will soon re-upload the Sedam to fix the driver PIX.
And i´m still working on the wheel situation, like QZT told me, i´m trying to rename all the wheels to fix the issue, but i having a little problems in the PT2 to do
Re: C2 To C1 Car Release
Posted: Fri Apr 13, 2018 4:24 pm
by Toshiba-3
Great work so far!
I feel like you're getting the hang of the tech side of C1 modding which is nice
Very interesting for me to help you, as it shows me steps/details I overlook when explaining to others and how to present it through videos.
Re: C2 To C1 Car Release
Posted: Fri Apr 13, 2018 5:00 pm
by WadeSullivan
Not at all Tosh, i must thanky you for all!!
Im finishing the wheels fixs to all the add-cars, and for your realeases too (if you don´t mind) soon all the cars will have their personal wheel and no more bugs during the gameplay
Re: C2 To C1 Car Release
Posted: Wed Apr 18, 2018 7:08 pm
by WadeSullivan
News:
links updated to ZIP file
wheels fixed
added crush data
Re: C2 To C1 Car Release
Posted: Fri Apr 27, 2018 3:46 pm
by Toshiba-3
WadeSullivan wrote:wheels fixed
Quick post to say Wade/Divatox also took the time to fix mislabeled wheel models within my addon cars (my first 17 C1 items) and I now updated the archives at RR2000.
Thanks man
Re: C2 To C1 Car Release
Posted: Mon Apr 30, 2018 6:10 pm
by WadeSullivan
Toshiba-3 wrote:WadeSullivan wrote:wheels fixed
Quick post to say Wade/Divatox also took the time to fix mislabeled wheel models within my addon cars (my first 17 C1 items) and I now updated the archives at RR2000.
Thanks man
No problem Tosh
And 3 more to go:
Rig O Mortis 2
Tornado
T-Bucket
Re: C2 To C1 Car Release
Posted: Tue May 01, 2018 2:38 am
by Sleep Dirt
Excellent stuff! I've been thinking about C1 a lot lately, will definitely give these a burn when I install
Re: C2 To C1 Car Release
Posted: Tue May 01, 2018 4:20 am
by Mastro 666
Re: C2 To C1 Car Release
Posted: Tue May 01, 2018 10:00 am
by 70's Viking
Re: C2 To C1 Car Release
Posted: Tue May 01, 2018 6:30 pm
by WadeSullivan
Hahaha that is Mother Trucker sister Joker
?
Thank you guys, enjoy them, and maybe in this week i will upload more
Re: C2 To C1 Car Release
Posted: Tue May 01, 2018 9:56 pm
by 70's Viking
Fixed
Re: C2 To C1 Car Release
Posted: Thu May 03, 2018 5:14 pm
by WadeSullivan
Re: C2 To C1 Car Release
Posted: Sat May 12, 2018 9:10 pm
by Toshiba-3
WadeSullivan wrote:(...) but the tail of the plane keeps entering into building and the floor (...)
This is just an issue with the bounding box. You have to tweak it according to the limits of the model as seen in PT2 when you import the DAT file (to have it positioned on the origin). The Ymin value should be higher than the car's bottom to give some space for the suspensions to work.
Furthermore you can add up to 6 "lone" collision points (it's best to have as few as possible). See SEMI.TXT for an example, compare the coords to SEMI.DAT imported in PT2.
In the case of the Stuka, I guess you'll have to add these points to define the wings?
Re: C2 To C1 Car Release
Posted: Thu Aug 16, 2018 3:32 pm
by WadeSullivan
And 5 more to go:
Mach13
Prop Shafter
JetCar
ForkingAda
LoggerHead
Sorry for the long time without posting
And Tosh i will try to look again on that
Re: C2 To C1 Car Release
Posted: Fri Aug 17, 2018 11:50 am
by hazardic
geez.. why i don't have time to test all these beaties
anyway good job, hope to test it soon
Re: C2 To C1 Car Release
Posted: Fri Aug 17, 2018 1:05 pm
by 70's Viking
I tried the new vehicles, and these four
Russ T
Ada nuff
Su borgis
Banjo strummy
do not work on my end
.
these do though
Nice work nonetheless.
Re: C2 To C1 Car Release
Posted: Fri Aug 17, 2018 1:48 pm
by WadeSullivan
What kind of error do you see Joker?
I can try reupload them
Re: C2 To C1 Car Release
Posted: Fri Aug 17, 2018 9:38 pm
by 70's Viking
It could be just on my end.
Russ T
Ada nuff
Banjo strummy
Do not show a grid image and crash the game.
Su borgis
Crashes the game when racing a second race with this car.
Perhaps it might be that they colide with other addon vehicles?
Re: C2 To C1 Car Release
Posted: Fri Aug 17, 2018 10:24 pm
by WadeSullivan
This is the image that you cant see from those 3 cars?
Su Borgis its ok in here, i can try pass to you the files one by one in discord if you like.
Re: C2 To C1 Car Release
Posted: Fri Aug 17, 2018 10:52 pm
by 70's Viking
That seems to be a little tedious.
Like i said its probaply because of one of the other addon vehicles (perhaps some of my own vehicles are at fault
)
Re: C2 To C1 Car Release
Posted: Fri Aug 17, 2018 11:42 pm
by WadeSullivan
strange, well when i was doing the convertion some cars were crashing my game i did aloooot of thing to fix. Toshiba one time give a name of a program that show to you what could be crashing. (i forgot the name
)
oh btw Tosh, can you help me to fix the colision/physical from 2 convertions? I guess the issue is the same so if i fix one the other would be easy, both are getting inside walls or others cars:
Re: C2 To C1 Car Release
Posted: Sat Aug 18, 2018 12:32 am
by Mastro 666
Re: C2 To C1 Car Release
Posted: Tue Aug 21, 2018 11:58 am
by 70's Viking
WadeSullivan wrote:strange, well when i was doing the convertion some cars were crashing my game i did aloooot of thing to fix. Toshiba one time give a name of a program that show to you what could be crashing. (i forgot the name
)
oh btw Tosh, can you help me to fix the colision/physical from 2 convertions? I guess the issue is the same so if i fix one the other would be easy, both are getting inside walls or others cars:
As far as i know (thanks to tosh) you need to hover on the edges of your vehicle in Cared or flummery.
In the left down corner you can see the X+ Y+ Z+ or X- Y- Z- (depends on where you are poiting your mouse)
Re: C2 To C1 Car Release
Posted: Sat Aug 25, 2018 2:03 am
by WadeSullivan
Hm i don´t know how to deal with both of those programs =/
I have trying
Re: C2 To C1 Car Release
Posted: Sat Oct 06, 2018 6:03 pm
by Toshiba-3
Only tested your cars now and they didn't crash for me. Just some missing textures (like the Su Borgis's windshield) but I guess you're aware of them.
About the bounding box, it's really just like the Joker said. You load your car in PT2 (as it works on your comp), and you check the -X,-Y,-Z and +X,+Y,+Z coordinates of the limits of collision around your car. The XYZ coords of the cursor are displayed under the list of components. You can enlarge that pane if the Z coord isn't shown (pane too narrow).
Re: C2 To C1 Car Release
Posted: Fri Oct 12, 2018 9:01 pm
by WadeSullivan
Ok after i get the coord, were in the car.txt i putt them?
Re: C2 To C1 Car Release
Posted: Sat Oct 13, 2018 3:45 pm
by Toshiba-3
You must place the coordinates defining the bounding box toward the end of the TXT file, within the
MECHANICS STUFF section:
Code: Select all
START OF MECHANICS STUFF version 4 [VERSION MUST BE 3 OR 4 AT LEAST]
-0.146075, 0, 0.243755 // left rear wheel position
0.146075, 0, 0.243755 // right rear
-0.146075, 0, -0.243755 // left front wheel position
0.146075, 0, -0.243755 // right front
0, 0.0508606, 0.00359181 // centre of mass position
-0.172460, -0.086737, -0.399117 // min x, min y, min z [PLACE THE LOWER COORDS HERE]
0.172460, 0.112388, 0.409674 // max x, max y, max z [PLACE THE GREATER COORDS HERE]
0 // extra points v. 3 [IN CASE YOU WANT TO ADD MORE]
0, 0.14, 0.480 // extra point 1 v. 3 [LIKE SO]
0, 0.14, -0.055 // extra point 2 v. 3
1.0 // min turning circle radius
0.0065, 0.0065 // suspension give (forward, back)
oh hi mark // ride height (must be more than miny in bounding box) [unused]
1.2 // damping factor
0.9797595 // mass in tonnes
1.25 // fractional reduction in friction when slipping
81, 76, 81 // friction angle (front and rear) v. 4
0.454920, 0.247699, 0.958791 // width, height, length for angular momentum calculation
2.0 // traction fractional multiplier v. 2
// a more realistic value for the above would be 1.4
50 // speed at which down force = weight v. 2
1.35 // brake multiplier, 1 = normal brakes v. 2
2.0 // increase in brakes per second 1 = normal v. 2
0.02, 0.02 // rolling resistance front and back
5 // number of gears
275 // speed at red line in highest gear
6.7 // acceleration in highest gear m/s^2 (i.e. engine strength)
END OF MECHANICS STUFF
In your case, the lower Y might probably not be negative, but it's not the end of the world.
Re: C2 To C1 Car Release
Posted: Sat Mar 02, 2019 4:41 am
by WadeSullivan
Finally new cars
Punky Ashy - Redvet
Rod Hell - HellRod
Farmer Fright - Harvest
Slasher - Diablus
Ron Dumpster - Plow-MK2
Re: C2 To C1 Car Release
Posted: Sun Mar 03, 2019 6:13 pm
by Toshiba-3
Re: C2 To C1 Car Release
Posted: Sun Mar 10, 2019 2:02 pm
by 70's Viking
I could not get Diablus and Rodhell to work, but the other three are great.
Nice job Wade.
Re: [CARMA1] C2 To C1 Car Release
Posted: Sat Aug 03, 2019 9:10 pm
by WadeSullivan
Updated the last ones:
Frau Dauver - CopCrash
Kurt Blasthoff - Bimmer
Nora Virus - Piranha
Maurice Stalwart - Mad Mortis
Buzz Lightweight - Buzz Mobile
Shawnee Smitt - DC Codbra
Re: [CARMA1] C2 To C1 Car Release
Posted: Tue Aug 06, 2019 1:57 pm
by Toshiba-3
Nice, thanks for posting them!
Here's a few things I noticed:
- There's already an addon car which uses the file PIRANHA.TXT, I suggest renaming yours to PIRANH4.TXT (to match the other filenames).
- Buzz really needs its transparency instead of the black parts.
- It seems like the rear lights for the Bimmer are using the 4x4 placeholder texture instead of the larger one used by the C2 braking light funk.