Page 1 of 1
cnc-ddraw still in development and more
Posted: Tue Jan 30, 2018 10:33 pm
by Toshiba-3
hifi's ddraw.dll is what we've been using for years now to propel Carma95.
It turns out FunkyFr3sh is still working on it and improving compatibility to work with Command & Conquer (while keeping an eye on Carmageddon).
https://github.com/CnCNet/cnc-ddraw
Releases can be downloaded there:
https://github.com/CnCNet/cnc-ddraw/releases
Re: cnc-ddraw still in development and more
Posted: Tue Jan 30, 2018 10:44 pm
by Toshiba-3
Just for the record and in case someone wants to try them out, here are a couple of other recent DDraw wrappers:
DDrawCompat,
https://github.com/narzoul/DDrawCompat
Runs very well, but no configuration possible, so no windowed mode.
(latest 'experimental' release is more up to date than its release date might indicate)
DxWrapper,
https://github.com/elishacloud/dxwrapper
Runs nicely too, again no windows mode without an external aid like DxWnd (included in the bundle)
Settings.ini must be renamed to ddraw.ini and DDrawCompat set to 0 within it.
Latest cnc-ddraw (see first above) has a problem with the mouse in Carmageddon.
Re: cnc-ddraw still in development and more
Posted: Mon Mar 19, 2018 6:39 pm
by Toshiba-3
FunkyFr3sh just did an update to fix the mouse and Alt+Tab in Carma95!
https://github.com/CnCNet/cnc-ddraw/rel ... ag/1.1.6.0
Re: cnc-ddraw still in development and more
Posted: Sat Oct 06, 2018 6:21 pm
by Toshiba-3
FunkyFr3sh is still working on cnc-ddraw and it's getting better and better.
He released version 1.2 some days ago:
https://github.com/CnCNet/cnc-ddraw/releases
Be sure to use the ddraw.ini file specifically made for Carmageddon as the additional line in there (sleep=33) makes all the difference. In my experience it fixed long time flickering issue. This release introduces a direct3d renderer.
Re: cnc-ddraw still in development and more
Posted: Sun Oct 07, 2018 11:23 am
by Harmalarm
Oh Cool! Just what I was looking for
Re: cnc-ddraw still in development and more
Posted: Wed Nov 07, 2018 8:40 pm
by Toshiba-3
More progress from FunkyFr3sh, especially making cnc-ddraw work again with Carmageddon 2 software!
However IIRC, direct3d might not like Carma95+multithreading too much. So stay in OpenGL.
https://github.com/CnCNet/cnc-ddraw/releases