Dear returning Carmageddon fans
These last years, the CWA Board assimilated what was archived from many old Carmageddon forums, including the whole of the Official Carmageddon.com Forums.
If you wish to merge any previous account you might have had with your new or existing CWA account, don't hesitate to reach out to us !
These last years, the CWA Board assimilated what was archived from many old Carmageddon forums, including the whole of the Official Carmageddon.com Forums.
If you wish to merge any previous account you might have had with your new or existing CWA account, don't hesitate to reach out to us !
I've tried everything to install this C2 map - help!
I've tried everything to install this C2 map - help!
It's the schwarzwald2 map.
I've even done a fresh install of C2 (a 2nd C2 folder(, done everything step-by-step as it says in the instructions (plus using Mapstockalypse - after clicking on carstockalypse first of course!). When I go on C2, I go on any level and it turns off after the loading screen! So, I have to delete that, and install it again!
what am I doing wrong!?
I've even done a fresh install of C2 (a 2nd C2 folder(, done everything step-by-step as it says in the instructions (plus using Mapstockalypse - after clicking on carstockalypse first of course!). When I go on C2, I go on any level and it turns off after the loading screen! So, I have to delete that, and install it again!
what am I doing wrong!?
- Powdered Toast MAAAN!!
- 12 Cyl Symphony
- Posts: 1277
- Joined: Wed Aug 09, 2000 4:00 pm
Re: I've tried everything to install this C2 map - help!
OK dude. You need to make sure all the correct files are in place. And don't bother with mapstock, hardly any customs endorse it anyway!
You should have a dir named after the track under your data/races dir.
Like this. C:/C2 dir/data/races/Track
Then you need to edit the races.txt found in data dir.
Simle just add the name of the track over an existing one. And don't replace any missions! Only regular races can be replaced.
Any more info just hit me a mail, or PM.
You should have a dir named after the track under your data/races dir.
Like this. C:/C2 dir/data/races/Track
Then you need to edit the races.txt found in data dir.
Simle just add the name of the track over an existing one. And don't replace any missions! Only regular races can be replaced.
Any more info just hit me a mail, or PM.
- C2 Scientist
- jaywalker
- Posts: 2059
- Joined: Tue Mar 26, 2002 5:00 pm
- Location: Finland
- Contact:
Re: I've tried everything to install this C2 map - help!
I can replace missions. Overwrite the mission lines with the lines of any regular race, then change the title of the race, the textfile reference, and change "Boundary race" into "1", so that the game knows where that particular race group ends. (Maybe this has been the problem with previous tries?)
And don't replace any missions! Only regular races can be replaced.
Re: I've tried everything to install this C2 map - help!
i got around it somehow... but that was a realy long time ago... dunno know now... but its possible tho
but i think it changed the race type to opponent... its still a mission BUT the only thing you need to do is to whack the opponents...
but i think it changed the race type to opponent... its still a mission BUT the only thing you need to do is to whack the opponents...
"One chicken in a thousand is hatched near a road. One in every ten thousand of those ever tries to cross it. Half of them are run over by cars."
Re: I've tried everything to install this C2 map - help!
kruszchev -> 'dunno' means 'i do not know'. there's no need to write 'dunno know'.
Re: I've tried everything to install this C2 map - help!
details!
dunno care... Happy now?
dunno care... Happy now?
"One chicken in a thousand is hatched near a road. One in every ten thousand of those ever tries to cross it. Half of them are run over by cars."
Re: I've tried everything to install this C2 map - help!
YOU should be happy there's someone to correct you.
Re: I've tried everything to install this C2 map - help!
nope... you should be unhappy that someone does correct me
Note the on the post above form me... I know the sentence is totaly wrong... i did it on purpuse
Note the on the post above form me... I know the sentence is totaly wrong... i did it on purpuse
"One chicken in a thousand is hatched near a road. One in every ten thousand of those ever tries to cross it. Half of them are run over by cars."
Re: I've tried everything to install this C2 map - help!
of course i got it.
Re: I've tried everything to install this C2 map - help!
oh yeah and it seems i've just become a mechanic. cool heh?
- Powdered Toast MAAAN!!
- 12 Cyl Symphony
- Posts: 1277
- Joined: Wed Aug 09, 2000 4:00 pm
Re: I've tried everything to install this C2 map - help!
Bow Down to my 12 Cyl Symphony!
HAze, you should try and run some of the cars on your site into C2, that is if you're not already!
HAze, you should try and run some of the cars on your site into C2, that is if you're not already!
Re: I've tried everything to install this C2 map - help!
nope they're too high poly. i'll be making a simple golf for carma to get familiar with all those editing techniques.
Re: I've tried everything to install this C2 map - help!
Cool Haze. It's not hard to get to grips with CarED. Even i'm making a car (FordGT40)
<---- 1970 Plymouth Superbird (Richard Petty Replica) at Brooklands.
Re: I've tried everything to install this C2 map - help!
no cared just sucks in terms of modeling. i will only use it to texture the car (eeh... that won't be a golf. it's going to be a fiat uno ).
Re: I've tried everything to install this C2 map - help!
What modeller are you going to use?
<---- 1970 Plymouth Superbird (Richard Petty Replica) at Brooklands.
not working still!
When I extract the map as it is, onto the main C2 folder and go on any map (without using mapstock) (on a fresh install), it still crashes!
could there be something wrong with the map itself maybe?
could there be something wrong with the map itself maybe?
Re: not working still!
This is the bit I don't understand what it means by in the readme:
"Find the code like you see below in SETTINGS.TXT and change add two (=2) to the number you see there."
--------------------START OF CODE ---------------------------------------
//***************************
// PED GROUPS
//***************************
72 // Number of groups
//(Remember that it starts at 0, so this no. is one more than last group no.)(honest this time ;o)
---------------------- END OF CODE ------------------------------------
I added 2 on to 72 (to 74), but that can't be what it means (and I don't get what it means - or does either)
"Find the code like you see below in SETTINGS.TXT and change add two (=2) to the number you see there."
--------------------START OF CODE ---------------------------------------
//***************************
// PED GROUPS
//***************************
72 // Number of groups
//(Remember that it starts at 0, so this no. is one more than last group no.)(honest this time ;o)
---------------------- END OF CODE ------------------------------------
I added 2 on to 72 (to 74), but that can't be what it means (and I don't get what it means - or does either)
Re: I've tried everything to install this C2 map - help!
GT40.. a Pick!!!
"One chicken in a thousand is hatched near a road. One in every ten thousand of those ever tries to cross it. Half of them are run over by cars."
I've got it
it doesn't matter now, I've got it sorted.
thanks for ALL your help! It worked what Toshiba-3 said (and everyone else helped too). Thanks all!
thanks for ALL your help! It worked what Toshiba-3 said (and everyone else helped too). Thanks all!
Re: I've tried everything to install this C2 map - help!
@ Kruszchev. Heh, You tell 'em
***When I die may I be surrounded by scattered chrome and burning gasoline***
Re: I've tried everything to install this C2 map - help!
Heres a pick of the GT40. It'll probably end up being left, it's the first car I've ever made!
<---- 1970 Plymouth Superbird (Richard Petty Replica) at Brooklands.
Re: I've tried everything to install this C2 map - help!
i defenetivle know what a GT40 is... a MODEL pick... thats what im looking for
"One chicken in a thousand is hatched near a road. One in every ten thousand of those ever tries to cross it. Half of them are run over by cars."
Re: I've tried everything to install this C2 map - help!
Oh sorry im stupid. Pic in attatchment.
As you can see it needs a shit load of work.
Can you duplicate the wheels so the polygons are already placed to make the wheel. Coz I iterate -1 on the X scale but it just does the points, and doesn't make the polys.
Also is there a tutorial that is better than Ben Beards one with the release?
As you can see it needs a shit load of work.
Can you duplicate the wheels so the polygons are already placed to make the wheel. Coz I iterate -1 on the X scale but it just does the points, and doesn't make the polys.
Also is there a tutorial that is better than Ben Beards one with the release?
<---- 1970 Plymouth Superbird (Richard Petty Replica) at Brooklands.
Re: I've tried everything to install this C2 map - help!
needs a shitload of work... nah its almost complete
you can do this to duplicate the wheels...
position one wheel in the correct place...
export it it...
then choose all the points on the wheel and go to transform, dont change any valuse exept the one named "Yaw (Y)" there it should say 180 instead of 0...
then OK...
and voila its on the other side BUT on the back...
now import the wheel you exported earlier and sience it was positioned the unimported wheel does only need to be matched in Z axis whit the recently imported wheel...
NOW select the newly imported wheel and use the "Yaw (Y)" thing... whit the same value...
and possition it on the back of the car... then import the exported wheel again... and that one should just bee moved backward to the possition where the rear wheel should be... when thats done import the wheel again
hopes that makes help... its hard to explain but its so simple when you done it once
you can do this to duplicate the wheels...
position one wheel in the correct place...
export it it...
then choose all the points on the wheel and go to transform, dont change any valuse exept the one named "Yaw (Y)" there it should say 180 instead of 0...
then OK...
and voila its on the other side BUT on the back...
now import the wheel you exported earlier and sience it was positioned the unimported wheel does only need to be matched in Z axis whit the recently imported wheel...
NOW select the newly imported wheel and use the "Yaw (Y)" thing... whit the same value...
and possition it on the back of the car... then import the exported wheel again... and that one should just bee moved backward to the possition where the rear wheel should be... when thats done import the wheel again
hopes that makes help... its hard to explain but its so simple when you done it once
"One chicken in a thousand is hatched near a road. One in every ten thousand of those ever tries to cross it. Half of them are run over by cars."
- random_monkey
- motorized monkey
- Posts: 2878
- Joined: Fri Sep 08, 2000 4:00 pm
- Location: Burton, Midlands, England
Re: I've tried everything to install this C2 map - help!
Dementor: You are able to iterate to scale -1 and keep the poly's - exactly the way you suggested...
there are 2 iterate buttons though, one is for points and one is for objects. The bottom one is for points and the top one is for objects (Use the objects one)
and kruszchev - that's a retarded way of doing it
there are 2 iterate buttons though, one is for points and one is for objects. The bottom one is for points and the top one is for objects (Use the objects one)
and kruszchev - that's a retarded way of doing it
Re: I've tried everything to install this C2 map - help!
Yeh, what da monkey sed.
I was gonna say dat first, but da monk beat me to it
I was gonna say dat first, but da monk beat me to it
***When I die may I be surrounded by scattered chrome and burning gasoline***
Re: I've tried everything to install this C2 map - help!
OK thanks guys. And that iterate button does work, thanks.
<---- 1970 Plymouth Superbird (Richard Petty Replica) at Brooklands.
Re: I've tried everything to install this C2 map - help!
ust an idea for kruszchev : why dont you apply a transparency attribute on the white color of your sig?
ummm... there is ONE problem... i dont have one... atlest i dont see it... and i dont know how... and i took a look at the "my home" settings for that pick... there arent a url to it?... damn im comfused at the moment
ummm... there is ONE problem... i dont have one... atlest i dont see it... and i dont know how... and i took a look at the "my home" settings for that pick... there arent a url to it?... damn im comfused at the moment
"One chicken in a thousand is hatched near a road. One in every ten thousand of those ever tries to cross it. Half of them are run over by cars."
Re: I've tried everything to install this C2 map - help!
ahem... i got the problem fixed... dunno know why you saw the pick... as the URL was gone... but i had "show other peoples sig" choosen to off... got it all fixed again... so, well, its fixed
"One chicken in a thousand is hatched near a road. One in every ten thousand of those ever tries to cross it. Half of them are run over by cars."
Check who’s online
Users browsing this forum: No registered users and 131 guests