Dear returning Carmageddon fans
These last years, the CWA Board assimilated what was archived from many old Carmageddon forums, including the whole of the Official Carmageddon.com Forums.
If you wish to merge any previous account you might have had with your new or existing CWA account, don't hesitate to reach out to us !
These last years, the CWA Board assimilated what was archived from many old Carmageddon forums, including the whole of the Official Carmageddon.com Forums.
If you wish to merge any previous account you might have had with your new or existing CWA account, don't hesitate to reach out to us !
1970 chevelle
- bruner_james
- The Dancing Bear
- Posts: 2016
- Joined: Wed Aug 27, 2003 6:19 pm
- Location: Canada
- Contact:
1970 chevelle
Well I am starting to get into the c2 groove. Just as school starts. Something about doing homework or modeling. well you probably have already seen it, but i have done a lot of work with the texures, and aligning stuff, (still need to work on that) but heres what i got.
Re: 1970 chevelle
arg.. this car needs some dogdishes or somehting.. but between the 2 the wire ones look the best
- bruner_james
- The Dancing Bear
- Posts: 2016
- Joined: Wed Aug 27, 2003 6:19 pm
- Location: Canada
- Contact:
Re: 1970 chevelle
I was also thinking crager rims, but then i look at all the others i have done, and most of them have cragers.
Re: 1970 chevelle
jesus james you didnt even add any tire to those other rims did you?
btw, did you ever get around to lining up the 3 textures?
btw, did you ever get around to lining up the 3 textures?
Haha Fuck you Kitteh
- bruner_james
- The Dancing Bear
- Posts: 2016
- Joined: Wed Aug 27, 2003 6:19 pm
- Location: Canada
- Contact:
Re: 1970 chevelle
apex is right the 2nd ones would look good if there was tire there.. lol
- bruner_james
- The Dancing Bear
- Posts: 2016
- Joined: Wed Aug 27, 2003 6:19 pm
- Location: Canada
- Contact:
Re: 1970 chevelle
Heres a pic of it ingame. I think it will fit in just fine
looking for new rims anyways, so if you think there might be some nice ones, please post a pic, and i will see how it looks.
looking for new rims anyways, so if you think there might be some nice ones, please post a pic, and i will see how it looks.
- SoupaVedg
- motorised death
- Posts: 776
- Joined: Fri Feb 22, 2002 5:00 pm
- Location: Province de Québec, Canada
Re: 1970 chevelle
It's pretty good, James. I really like it... But out of curiousity, what is that old 30ish car it's about to impact with?
SoupaVedg! The only super hero who have Soup in his name!
- bruner_james
- The Dancing Bear
- Posts: 2016
- Joined: Wed Aug 27, 2003 6:19 pm
- Location: Canada
- Contact:
Re: 1970 chevelle
thats the 32 ford.
the original download was on this page
http://stockchase.com/~bruner_james/bruner_james.html
and the skin is at
http://stockchase.com/~bruner_james/bruner_james~2.html
the original download was on this page
http://stockchase.com/~bruner_james/bruner_james.html
and the skin is at
http://stockchase.com/~bruner_james/bruner_james~2.html
Re: 1970 chevelle
Didnt the one who goes by Muscle Car Freak, or "MCF" already make a 70 chevelle? And that one at least has detachable parts?!
- bruner_james
- The Dancing Bear
- Posts: 2016
- Joined: Wed Aug 27, 2003 6:19 pm
- Location: Canada
- Contact:
Re: 1970 chevelle
yeah, he did. it is here!, Like i said in my el camino post I am doing this for my self. So if it doesn't have fenders detachable, it is because I was to lazy to model whats under neith the fenders. nothing else.
Re: 1970 chevelle
If its only for you. Shut up and dont mention it. Because you dont want to accept any negative comments at all .. but you still want everyone to hail it, doesnt work that way buddy.
Was Der So Alles Kann
- bruner_james
- The Dancing Bear
- Posts: 2016
- Joined: Wed Aug 27, 2003 6:19 pm
- Location: Canada
- Contact:
Re: 1970 chevelle
Yes I am doing it for myself, but I am letting everyone else have a chance to try it. I can accept constructive comments, but people saying, "you shouldn't even be doing this, because it was already done, and it was done better." constructive comments, usually tell them about problems with it, like the textures are a bit blurry or something along those lines. Most people don't like what i do, which don't bother me. I don't expect people to hail it, I never have.
If its only for you. Shut up and dont mention it. Because you dont want to accept any negative comments at all .. but you still want everyone to hail it, doesnt work that way buddy.
btw, why are you even posting in the c2 section? I thought your c2 didn't work.
Re: 1970 chevelle
I've had it for 3 months there james.. I just dont play anyone elses cars except some of the earlier add-ons
Was Der So Alles Kann
- Detroit_Diesel
- Cadillac Enthusiast
- Posts: 831
- Joined: Mon Aug 23, 2004 11:15 am
Re: 1970 chevelle
gettin back to the topic..
i think that theres just a lil problem in the rear quarter texture
everything else looks gr8 =)
i cant remember the right words but its somethin like this :
heres my suggestion
i think that theres just a lil problem in the rear quarter texture
everything else looks gr8 =)
i cant remember the right words but its somethin like this :
heres my suggestion
"So many pedestrians, so little time." Feel like some road kill today?
Re: 1970 chevelle
I just dont play anyone elses cars except some of the earlier add-ons
so why does it matter if some one makes the same car 15 times? its not like your going to be
bothered by it anyways
Haha Fuck you Kitteh
- bruner_james
- The Dancing Bear
- Posts: 2016
- Joined: Wed Aug 27, 2003 6:19 pm
- Location: Canada
- Contact:
Re: 1970 chevelle
excuse me NitroX, did i say that was you're complaint? no i didnt,
but since were talking about this, who else said it but you? if i recall correctly it was you who
said something like "If its only for you. Shut up and dont mention it." Which is in my mind, Is rude
and attempting to start a flame war, so if you dont have anything NICE to say, dont say shit
God CWA is going to shit....
but since were talking about this, who else said it but you? if i recall correctly it was you who
said something like "If its only for you. Shut up and dont mention it." Which is in my mind, Is rude
and attempting to start a flame war, so if you dont have anything NICE to say, dont say shit
God CWA is going to shit....
Haha Fuck you Kitteh
- Detroit_Diesel
- Cadillac Enthusiast
- Posts: 831
- Joined: Mon Aug 23, 2004 11:15 am
Re: 1970 chevelle
nitro is a expert on that!
he just start sayn all he wants shooting everyone...
but when someone give him a lil bump he starts to say:
"hey dude dont bump on me, i didnt do anything against you.."
thats my impression about him, thats what i think,
he gave me a lot of reasons to think like this..
ahh..
and when he got a lil flamed he give a bad excuse and finish the post with...
Peace
he just start sayn all he wants shooting everyone...
but when someone give him a lil bump he starts to say:
"hey dude dont bump on me, i didnt do anything against you.."
thats my impression about him, thats what i think,
he gave me a lot of reasons to think like this..
ahh..
and when he got a lil flamed he give a bad excuse and finish the post with...
Peace
"So many pedestrians, so little time." Feel like some road kill today?
Re: 1970 chevelle
What's with all the fighting! relax and enjoy the ride guys, no need to mess things up.
@bruner_james: Dude, the one with the 20"s rims looks cool, sorta like a hot wheels car... you can actually make it smaller and pretend it is one, and it's not a bad idea since the car has no detachables... I did that once with a volvo S40, it was an RC scale car... still around somewhere, I guess
@bruner_james: Dude, the one with the 20"s rims looks cool, sorta like a hot wheels car... you can actually make it smaller and pretend it is one, and it's not a bad idea since the car has no detachables... I did that once with a volvo S40, it was an RC scale car... still around somewhere, I guess
- bruner_james
- The Dancing Bear
- Posts: 2016
- Joined: Wed Aug 27, 2003 6:19 pm
- Location: Canada
- Contact:
Re: 1970 chevelle
theres an idea, It whould be good for this one, cause it only has 2000 some polys. And yeah your volvo is still around, i just saw it in my c2 directory a yesterday.
Re: 1970 chevelle
Is there a version that isn't barely scraping the asphalt and has a decent suspension softness?
- TTR
- Psycho Maniac
- Posts: 5277
- Joined: Wed Oct 15, 2003 3:40 am
- Location: Rotterdam, Holland
- Contact:
Re: 1970 chevelle
Is there a version that isn't barely scraping the asphalt and has a decent suspension softness?
Autopilot: "Didnt the one who goes by Muscle Car Freak, or "MCF" already make a 70 chevelle? And that one at least has detachable parts?!"
James: "yeah, he did. it is here!, Like i said in my el camino post I am doing this for my self. So if it doesn't have fenders detachable, it is because I was to lazy to model whats under neith the fenders. nothing else."
For the link look at those post some way up
Check who’s online
Users browsing this forum: helomyname and 231 guests