The CWA Board

Slayer

deathstreet is still being worked on by chevyII or small block as he is known on the board....yes, it's coming soon along with daytona speedway and 3(!) c1 tracks merged into one

Slayer

this can't be for a 83 oldsmobile can it? or did you lose your sanity and buy an '83 mudstain?

Slayer

<t>well anyone who tries to take a sharp turn at 100mph like it was a porsche in an olds is fucking stupid anyway .... it's not as if after a big block swap this car would be unsafe though, it would just take alot more work to make it's handling and braking performance as good as it's straight line ...

Slayer

<t>don't use 305 heads, they have smaller combustion chambers, which will up your CR a bit, but they flow like crap, hardly better than the shitty heads they used on the 4.3 6's.... but putting 350 heads on a stock bottom end 305 will not livin' it up either, the bigger chambers on the 350 head will...

Slayer

[ October 30, 2002: Message edited by: Slayer ]

Slayer

no! small block=bad! listen, you need TORQUE to acclerate, and with a mild build-up, the best you could hope for with a 305 is about 295hp and say, 310ft/lbs of torque..and that wouldn't cut it for me...it's easy to get power with a big block, now i'm more familiar with mopar engines but i know the ...

Slayer

swapping to another GM small block would be the easiest thing to do, say a 327 or 350/400 from 1963 to 1971 which is when they had the most power, but it might be hard to pick up one of those 330hp '69 350's cheap...the most bang for the buck would be a 455 which you could definitely get for under a...

Slayer

<t>yeah i know, open the hood of a modern car and you MIGHT be able to see the very top of the valve cover and intake and a huge mass of wires, whole harnesses evreywhere, sensors, vacuum lines, hoses and generaly lots of crap making a big mess, not only do you have to take lots of this shit off to ...

Slayer

mine is just as bad or worse, i gotta old celeron 366 with 64mb ram, the only newish thing in it is a ATI radeon 7500 card which has 32mb of DDR, but i still liked my old Voodoo3 3000 16megger better until it melted

Slayer

I would have to say GTA3, Gran Turismo 2 and of course carma2

Slayer

<t>why do you have "boring" and then the stubborn and box parts...if you want it to come off it should say "detach" in there, and if it's not supposed to come off, get rid of the "stubborn stubborn box" bit that should fix it, the game thinks that the part...

Slayer

nice duster, i would have made one eventually but looks like you got there first...on the engine i'd say leave a 340, but if you want a street killer i'd put a tunnel ram with 2 750 demons on there Mopar Muscle did a similar engine build-up a while ago with a tunnel rammed 340 and it made 600+hp, no...

Slayer

<t>It's a 70 or 71 buick skylark like hellspawn said, and adr's GSX is basically the same thing so just make a blue skin with out the stripes on it... how could you think it was a chevelle anyway? it looks more like an impala than one of those...the swept up back rear window is one of the more disti...

Slayer

what was the point of that? I mean how hard is it to paste the url into your message?..anyways i'm sure someone could use them...

Slayer

<t>the gaycube sucks..... it is a very powerful machine, but i don't see any real quantity of good games coming out for it..the only thing i'd want if for right now is resident evil and that's it, nintendo's older stuff had a reputation as being "kiddie"..and the gamecube is no different, they only ...

Slayer

<t>lame as mopar?!fucker, hemi's?lame?huge ass chryslers?lame? coronets etc..whatev....you say beetles have originality? yeah, they did in the 60's and 70's when they looked like nothing else on the road, but what about when they were designed in the early 30's? they still looked a bit odd because o...

Slayer

i know it's v-tec, it's just the ricers who don't know shit about shit can't spell it..i've seen v-tech on a nissan and v-tek on a K-car of all things!

Slayer

lookin good, but to be ultimate rice it will need: -the one wiper conversion, adds up to 10hp!! about 50 stickers evreything from NOS to goodyear to hyundai-10hp per sticker! -DUAL fart pipes, but 1 of them isn't connected to anything..it has to only LOOK like duals.. adds 50hp at least -a bookshelf...

Slayer

pffffft honda pffffft rice I hope to god at least this game doesn't have a riceburner invasion... it cerainly is modeled well but.......ick already there's someone here saying "tyte"..sigh "yo dawg dat phat bitch be tyte yo, all you bitches who be hatin' on it are just jealous...word,...

Slayer

fuck you i'm not complaining about this guy's car in particular, and as I said it seems to be very well modeled, I'm just talking about the riceburner commmunity in general, which has exploded ever since that lame and unrealistic movie came out...it almost seems like a fad to me.....either way, i'll...

Slayer

<t>thanks DB, you know i used to hate the rice mobiles with a passion and i still do, but evrey so often i'll see a clean one without the fart pipe, bookself wing an 50lbs of vinyl stickers that doesn't look all that bad, but what i realized is I hate the PEOPLE who like rice more than the cars them...

Slayer

the kind of stuff they do is pretty cool <img class="smilies" src="images/smilies/veryoldones/smile.gif"/> but what a shitty car, uber cool? it looks kinda like a toyota wagon that was the meat in a bus and frieghtliner 18 wheeler sandwich, hell i could fit 2 of them in the trunk of the newport <img...

Slayer

actually i think some of my cars are higher poly than adr's, i think it's 'cause adr usually makes the cars body itself somewhat basic and jams all the polys into the chassis,wheels and engine i usually go overboard on the body and dash detail and by the time i get to doing the chassi...

Slayer

hey, don't knock the corvair, yes, the pre-65 ones tended to roll over on sharp turns if the tires wern't inflated properly, but they were ugly anyway... the '65 to '69 ones had much better styling (i think) and had a new rear suspension that replaced the old swing-axle design......

Slayer

i found <A HREF="http://www.holley.com">www.holley.com</A> and <A HREF="http://www.edelbrock.com">www.edelbrock.com</A> useful (if you're making an american v-8 at least) to get textures for things like intakes, carbs, valve covers, water pumps and other stuff for whatever the engine is i'...

Slayer

driventothestore, i would say your problem is the files in the cars zip are not extracting to their proper folders, it sounds like you're trying to put all the cars files, (tifs, act, dat etc..) into the game yourself when you don't have to....if you're using winzip, make sure the "us...

Slayer

<t>well you need the tow boom of course, a winch, and a panel with some levers on it for lowering or raising the boom and stuff..i'll try to find a pic of oneand buzzer, here's how far i am so far on that caddy you wanted.... since i took that pic i finished the dash too, it should be done in a coup...

Slayer

i don't have many die-casts, mostly 1:24 plastic kits, over the years i probably had close to a 100 all together but many are gone now cause i used to play with em or whatever, the ones i have now have been banging around for while so some pieces are gone etc... but they are: '58 impal...

Slayer

<t>adr, i agree totally on the poly count,6500 maximum or somewheres around there sounds good, maybe we should set a limit on polycount and if you go over that, you'll just have to go back and cut polys from your car by modifying the model or whatever. high poly cars look awesome, but the slowdown i...

Slayer

you can, just go to the in-game menu (esc) and click "abort game" it takes you back to the race select screen and you only have the eagle, like starting a new game..... -------------------- <IMG SRC="https://web.archive.org/web/20021118101011if_/http://www.3dactionplanet.com/carma...

Slayer

hey beroc nice job on the conversions, except i installed the edsel, and when i try it gives me an error about a missing texture called chevy something, i forget the rest.....

Slayer

i'm working on a couple of cars right now, a 59 bel air and a 63 pontiac bonneville, but i'm alot further along on the bel-air so i though i'd show that, have a looky...... <IMG SRC="https://web.archive.org/web/20021118101011if_/http://www.3dactionplanet.com/carmageddon/archive/b...

Slayer

we dine quite well here in camelot, we ham and jam and spam alot!!!!! -------------------- <IMG SRC="https://web.archive.org/web/20021118101011if_/http://www.3dactionplanet.com/carmageddon/archive/newportfire.jpg"> Chrysler FIREpower:) <A HREF="https://crashocalypse.cwab...

Slayer

blippppppppppppp

--------------------

Chrysler FIREpower:) crashoc

Slayer

very very nice work adr, i was gonna make a 55 bel-air hard top, but now it would be pointless...maybe i'll do a '53 or a '56 nomad instead <img class="smilies" src="images/smilies/veryoldones/smile.gif"/> -------------------- <IMG SRC="https://web.archive.org/web/2...

The CWA Board

Search found 140 matches

Re:

Re: 351W...

Re: For Deep_Blue...

Re: For Deep_Blue...

Re: AdR vs. Econobrick: the battle of the... cattle?

Re: For Deep_Blue...

Re: For Deep_Blue...

Re: "You Drive a Honda Civic Not a Race Car"

Re: GTA crash photos?

Re: What’s the one game you NEVER get tired of?

Re: What that error mean?

Re: Building the perfect beast

Re: vanilla sky car?

Re: blueprints

Re: Wave bye-bye to the Starcraft series...

Re: C2 car problem - need help!

Re: A compromise?

Re: A compromise?

Re: New Release

Re: New Release

Re: New Release

Re: Offroading With a SMART. =)

Re: Car of the month

Re: Worst cars of the millennium

Re: car engine textures

Re: Can someone give me a helping hand?

Re: tryin to make a towtruck....

Re: Anyone into die-casts???

Re: Vehicles & textures

Re: Car availablility

Re: New Stuff at LOD

'59 bel-air

Re: test.....(N/T)

test.....(N/T)

Re: '55 Chevy 210 custom